Alcatel-Lucent certification 4A0-103 exam targeted training

As we all know, in the era of the popularity of the Internet, looking for information is a very simple thing. But a lot of information are lack of quality and applicability. Many people find Alcatel-Lucent 4A0-103 exam training materials in the network. But they do not know which to believe. Here, I have to recommend DumpLeader's Alcatel-Lucent 4A0-103 exam training materials. The purchase rate and favorable reception of this material is highest on the internet. DumpLeader's Alcatel-Lucent 4A0-103 exam training materials have a part of free questions and answers that provided for you. You can try it later and then decide to take it or leave. So that you can know the DumpLeader's exam material is real and effective.

Everyone has their own dreams. What is your dream? Is it a promotion, a raise or so? My dream is to pass the Alcatel-Lucent 4A0-103 exam. I think with this certification, all the problems will not be a problem. However, to pass this certification is a bit difficult. But it does not matter, because I chose DumpLeader's Alcatel-Lucent 4A0-103 exam training materials. It can help me realize my dream. If you also have a IT dream, quickly put it into reality. Select DumpLeader's Alcatel-Lucent 4A0-103 exam training materials, and it is absolutely trustworthy.

Exam Code: 4A0-103
Exam Name: Alcatel-Lucent (Alcatel-Lucent Multiprotocol Label Switching)
One year free update, No help, Full refund!
Total Q&A: 98 Questions and Answers
Last Update: 2014-01-19

According to the survey, the candidates most want to take Alcatel-Lucent 4A0-103 test in the current IT certification exams. Of course, the Alcatel-Lucent 4A0-103 certification is a very important exam which has been certified. In addition, the exam qualification can prove that you have high skills. However, like all the exams, Alcatel-Lucent 4A0-103 test is also very difficult. To pass the exam is difficult but DumpLeader can help you to get Alcatel-Lucent 4A0-103 certification.

DumpLeader can provide you a pertinence training and high quality exercises, which is your best preparation for your first time to attend Alcatel-Lucent certification 4A0-103 exam. DumpLeader's exercises are very similar with the real exam, which can ensure you a successful passing the Alcatel-Lucent certification 4A0-103 exam. If you fail the exam, we will give you a full refund.

4A0-103 Free Demo Download: http://www.dumpleader.com/4A0-103_exam.html

NO.1 Click on the exhibit button below.
Consider the following:
-Routers R1 and R4 are in Area 1.
-Routers R4 and R5 in Area 0.
-Routers R5 and R3 are in Area 2.
To support LDP-over-RSVP tunnels between routers R1 and R3 over path R1-R4-R5-R3, with which
routers will router R5 require targeted sessions? (Choose two)
A. Router R1
B. Router R4
C. Router R2
D. Router R3
Answer: B,D

Alcatel-Lucent   4A0-103 pdf   4A0-103 exam

NO.2 Which of the following statements best describe MPLS fast reroute characteristics? (Choose two)
A. Fast reroute requires you to manually define detour paths.
B. Fast reroute provides path protection close to the failure point
C. Fast reroute performs automatic path calculation and signaling.
D. Fast reroute protects both primary and secondary paths.
Answer: B,C

Alcatel-Lucent questions   4A0-103 dumps   4A0-103 test questions   4A0-103   4A0-103   4A0-103

NO.3 Click on the exhibit button below.
With fast reroute enabled, and given the following:
-The protected LSP path is R1-R2-R3.
-All links are of equal cost.
Which of the following statements is true? (Choose two)
A. Router R1 is the LSP originator and is also a PLR.
B. With one-to-one link or node protection, the detour LSP path is R1-R4-R5-R2-R3.
C. With one-to-one link or node protection, the detour LSP path is R1-R4-R5-R3.
D. If the R2-R3 link fails, router R3 becomes a PLR
E. None of the nodes can be protected with FRR.
Answer: A,C

Alcatel-Lucent   4A0-103 original questions   4A0-103   4A0-103 test answers

NO.4 Which command can be used to verify the LDP settings for label distribution and retention?
A. show router ldp default
B. show router ldp parameters
C. show router ldp settings
D. show router mpls settings
E. show router mpls label-options
Answer: B

Alcatel-Lucent practice test   4A0-103 questions   4A0-103   4A0-103 exam dumps   4A0-103 test answers

NO.5 In MPLS, labels are distributed in the opposite direction of the data flow.
A. TRUE
B. FALSE
Answer: A

Alcatel-Lucent   4A0-103 study guide   4A0-103 questions

NO.6 Click on the exhibit button below.
Given the configuration below, what is the system ID of the destination node?
A. 10.32.1.2
B. 10.1.478
C. 1048.1.1
D. Cannot tell from this configuration
E. 10.1.2.2
Answer: B

Alcatel-Lucent study guide   4A0-103 exam simulations   4A0-103   4A0-103 certification training

NO.7 Which of the following statements best describes downstream unsolicited label distribution?
A. An LER may answer requests for label mappings immediately, without waiting for a label mapping from
the next-hop.
B. An LER may advertise label mappings to all peers for which it might be a next-hop for a given FEC.
C. An LER propagates a label mapping downstream for a FEC. only if it has a label mapping for the FEC
next-hop.
D. An LER will only distribute a label for a FEC when it has been requested to do so.
Answer: B

Alcatel-Lucent exam dumps   4A0-103 certification   4A0-103 test answers   4A0-103   4A0-103 exam

NO.8 Assume that, on the Alcatel-Lucent 7750 SR, an LSP is configured with one-to-one FRR and node
protection. Which of the following statements are FALSE? (Choose two)
A. Each PLR signals a detour LSP that avoids the downstream node. If the downstream node cannot be
avoided, a detour LSP that avoids the downstream link is signaled.
B. The detour LSP can take one or more hops before merging back on the protected LSP.
C. The merge point of the protected LSP must be the next-next-hop node
D. The ingress router will set the local protection desired flag in the session attribute object of the path
message to inform all routers along the protected LSP path to establish detour LSPs.
E. The label recording desired flag must be set in the session attribute object in order for the PLR to know
what label to swap when using the detour LSP.
Answer: C,E

Alcatel-Lucent   Braindumps 4A0-103   4A0-103   4A0-103 certification   4A0-103

NO.9 Which of the following message types does RSVP use to set up an LSP? (Choose two)
A. Path message
B. iLER message
C. Resv message
D. LSP setup call request
E. eLER message
Answer: A,C

Alcatel-Lucent practice test   4A0-103 exam dumps   4A0-103 certification training   4A0-103

NO.10 What is the significance of receiving a packet with the bottom MPLS label S bit set to 1?
A. It results in forwarding based on the next packet header.
B. It indicates that the label is the bottom of the MPLS label stack.
C. It indicates that the label is the top of the MPLS label stack.
D. Any LSR that receives an S bit set to 1 must discard the packet.
Answer: B

Alcatel-Lucent dumps   4A0-103   4A0-103 test answers   4A0-103

NO.11 What is the common usage of the MPLS EXP bits?
A. Each implementation can use them as they see fit.
B. They are used to carry the Ethertype value.
C. They are used to carry the TTL value.
D. They are used to carry QoS classification.
E. They are used to carry fragmentation flag information
Answer: D

Alcatel-Lucent   4A0-103   4A0-103 certification training   4A0-103 pdf

NO.12 Which of the following is defined by the following statement? All label mappings received from all peer
LSRs are saved.
A. Conservative label retention
B. Liberal label retention.
C. Downstream on demand.
D. Downstream unsolicited.
Answer: B

Braindumps Alcatel-Lucent   4A0-103   4A0-103 certification training

NO.13 Which of the following statements regarding LSP path configuration are true? (Choose three)
A. The path must include at least one hop.
B. The path may be used multiple times in a single LSP.
C. The path may comprise loose hop entries only.
D. The path must define the LSP's tail end.
E. The path may be used for multiple LSPs.
Answer: C,E

Braindumps Alcatel-Lucent   4A0-103 certification training   4A0-103   4A0-103 Bootcamp

NO.14 Click on the exhibit button below.
Assuming that LSP R1-R2-R3 requests the default fast reroute configuration, which router becomes a
DMP for the detour tunnels?
A. Router R1
B. Router R2
C. Router R3
D. Router R4
E. Router R5
Answer: E

Alcatel-Lucent pdf   4A0-103   4A0-103

NO.15 During node protection signaling, the PLR knows the address of the MP from which of the following
methods?
A. The PLR issues a RSVP path message to the destination router to request the address of the MP.
B. The PLR learns the address of the MP from the ERO.
C. The PLR learns the address of the MP from the RRO
D. The PLR learns the address of the MP from the targeted RSVP hello message.
E. The PLR does not need to know the address of the MP.
Answer: C

Alcatel-Lucent questions   4A0-103 practice test   4A0-103 demo

NO.16 Click on the exhibit button below.
Given the output below, which of the following statements are true? (Choose three)
A. A packet arriving with label 131066 and destined for prefix 10.10.10.243/32 will be forwarded out
interface 1/1/4, with label 131070.
B. LDP ECMP is enabled.
C. The router ¯ s sys t e m add r ess i s 10 . 10 . 10 . 242 / 32 .
D. There are multiple LSPs to reach FEC 10.10.10.244/32.
E. The router cannot receive any unlabeled packets destined for prefix 10.10.10 223/32.
Answer: A,B,D

Alcatel-Lucent   4A0-103   4A0-103

NO.17 You wish to advertise LDP labels for all local networks; which is the most effective policy statement to
use?
A. from prefix-list direct
B. match local
C. from protocol direct
D. match protocol direct
E. from protocol local
Answer: C

Alcatel-Lucent exam simulations   Braindumps 4A0-103   4A0-103   4A0-103

NO.18 Click on the exhibit button below.
With fast reroute enabled, and given the following:
-Two protected LSPs with the path R1-R2-R3
-Both LSPs enable facility bypass and link protection.
When router R1 is the PLR, which router becomes the MP?
A. Router R1
B. Router R2
C. Router R3
D. Router R4
E. Router R5
Answer: B

Alcatel-Lucent practice questions   4A0-103   4A0-103   4A0-103 answers real questions   4A0-103   4A0-103 exam prep

NO.19 Which of the following indicates the path over which an LSP's tail end router will return an RSVP RESV
message?
A. The IGP FIB.
B. The Reservation State Block (RSB)
C. The Path State Block (PSB)
D. The opaque database.
Answer: C

Alcatel-Lucent   4A0-103 study guide   4A0-103 original questions   4A0-103

NO.20 Router R3 signals an LSP, reserving 1Gbps bandwidth on a 10Gbps link. RSVP configuration limits
reservable bandwidth to 20 percent on the egress interface. Which of the following statements is true?
A. The egress RSVP interface has 80 percent bandwidth unreserved.
B. LSPs can reserve an additional 9.9 Gbps bandwidth on this RSVP interface.
C. The head end reserves 100Mbps for the LSP
D. The egress RSVP interface has 1 Gbps bandwidth unreserved.
Answer: D

Alcatel-Lucent   4A0-103   4A0-103   4A0-103

DumpLeader offer the latest 70-486 exam material and high-quality 00M-617 pdf questions & answers. Our 70-684 VCE testing engine and 640-916 study guide can help you pass the real exam. High-quality 70-481 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.dumpleader.com/4A0-103_exam.html