Juniper certification JN0-130 exam training materials

Juniper JN0-130 is a certification exam to test IT expertise and skills. If you find a job in the IT industry, many human resource managers in the interview will reference what Juniper related certification you have. If you have Juniper JN0-130 certification, apparently, it can improve your competitiveness.

I believe that a lot of people working in the IT industry hope to pass some IT certification exams to obtain the corresponding certifications. Some IT authentication certificates can help you promote to a higher job position in this fiercely competitive IT industry. Now the very popular Juniper JN0-130 authentication certificate is one of them. Although passing the Juniper certification JN0-130 exam is not so easy, there are still many ways to help you successfully pass the exam. While you can choose to spend a lot of time and energy to review the related IT knowledge, and also you can choose a effective training course. DumpLeader can provide the pertinent simulation test,which is very effective to help you pass the exam and can save your precious time and energy to achieve your dream. DumpLeader will be your best choice.

What are you waiting for? Opportunity knocks but once. You can get Juniper JN0-130 complete as long as you enter DumpLeader website. You find the best JN0-130 exam training materials, with our exam questions and answers, you will pass the exam.

According to the survey, the candidates most want to take Juniper JN0-130 test in the current IT certification exams. Of course, the Juniper JN0-130 certification is a very important exam which has been certified. In addition, the exam qualification can prove that you have high skills. However, like all the exams, Juniper JN0-130 test is also very difficult. To pass the exam is difficult but DumpLeader can help you to get Juniper JN0-130 certification.

Now, you should do need to get the exam question sets from year to year and reference materials that is related to Juniper JN0-130 certification exam. Busying at work, you must not have enough time to prepare for your exam. So, it is very necessary for you to choose a high efficient reference material. What's more important, you should select a tool that suits you, which is a problem that is related to whether you can pass your exam successfully. Therefore, try DumpLeader Juniper JN0-130 practice test dumps.

Exam Code: JN0-130
Exam Name: Juniper (Juniper networks Certified internet specialist.e(jncis-e))
One year free update, No help, Full refund!
Total Q&A: 128 Questions and Answers
Last Update: 2014-02-22

Have you thought of how to easily pass Juniper JN0-130 test? Have you found the trick? If you don't know what to do, I'll help you. In actual, there are many methods to sail through JN0-130 exam. One is to learn exam related knowledge JN0-130 certification test demands. Are you doing like this?However the above method is the worst time-waster and you cannot get the desired effect. Busying at work, you might have not too much time on preparing for JN0-130 certification test. Try DumpLeader Juniper JN0-130 exam dumps. DumpLeader dumps can absolutely let you get an unexpected effect.

Before you decide to buy DumpLeader of Juniper JN0-130 exam questions, you will have a free part of the questions and answers as a trial. So that you will know the quality of the DumpLeader of Juniper JN0-130 exam training materials. The Juniper JN0-130 exam of DumpLeader is the best choice for you.

JN0-130 Free Demo Download: http://www.dumpleader.com/JN0-130_exam.html

NO.1 Which three statements about Label-Switched Paths (LSPs) are true? (Choose three.)
A. LSPs are bidirectional.
B. LSPs are unidirectional.
C. LSPs can be signaled by CAC.
D. LSPs can be configured explicitly.
E. LSPs can be configured dynamically.
Answer: BDE

Juniper test answers   JN0-130 exam simulations   JN0-130 exam dumps   JN0-130

NO.2 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D

Juniper study guide   JN0-130 dumps   JN0-130 braindump   JN0-130 certification

NO.3 Which message type is used to initiate an RSVP-TE label switched path?
A. path
B. resv
C. setup
D. session
Answer: A

Juniper   JN0-130 test   JN0-130   JN0-130

NO.4 Which CLI command displays the VRFs that are operational within each virtual router?
A. show vir
B. show ip vrf
C. show vrf vir
D. show mpls vrf
Answer: A

Juniper   JN0-130   JN0-130 answers real questions   JN0-130 study guide

NO.5 In a Bridged 1483 network, which set of commands is used to configure an ATM subinterface?
A. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip address unnumbered loopback0
B. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip unnumbered loopback0
C. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip address unnumbered loopback0
D. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip unnumbered loopback0
Answer: D

Juniper exam simulations   JN0-130   JN0-130   JN0-130   JN0-130

NO.6 Which CLI command displays the status of a PPP over Ethernet subinterface?
A. show pppoe interface
B. show ppp int state up
C. show ip interface brief
D. show pppoe subinterface
Answer: D

Juniper   JN0-130 test answers   JN0-130 test answers

NO.7 Which configuration command places interfaces whose IP addresses are between 192.168.0.0 and
192.168.255.255 into OSPF area 0?
A. network 192.168.0.0 255.255.0.0 area 0.0.0.0
B. network 192.168.0.0 0.0.255.255 area 0.0.0.0
C. area 0.0.0.0 network 192.168.0.0 255.255.0.0
D. area 0.0.0.0 network 192.168.0.0 0.0.255.255
Answer: B

Juniper   JN0-130   JN0-130 test   JN0-130 test answers   JN0-130 braindump   JN0-130 Bootcamp

NO.8 Which CLI command is used to set a Privileged Exec password of mypassword?
A. enable password 0 mypassword
B. enable password 3 mypassword
C. enable password 5 mypassword
D. enable password 10 mypassword
Answer: A

Juniper   JN0-130 test   JN0-130

NO.9 Which three statements are true regarding the DHCP Internal Server? (Choose three.)
A. Can be in remote-access mode.
B. Can be in equal-access mode.
C. Can be in standalone mode.
D. Standalone mode is the default.
E. Equal-access mode is the default.
Answer: BCE

Juniper   JN0-130 certification training   JN0-130   JN0-130 test answers

NO.10 Is the IS-IS Designated Intermediate System (DIS) election process called Deterministic or Static and
why?
A. It is Static. If the priorities are equal for a new neighbor and the current DIS only.
B. It is Deterministic. If the well-known pseudonode and system ID is configured on the new neighbor only.
C. It is Deterministic. When a new router appears on a multi-access network with a higher priority value, it
is elected as the DIS.
D. It is Static. When a new intermediate system powers up on a multi-access network, even if it has a
higher priority, it may become a backup DIS.
Answer: C

Juniper   JN0-130 exam prep   JN0-130   JN0-130 test questions   JN0-130 pdf

NO.11 Which two BGP attributes are incorporated for loop prevention within an AS using a route reflection
configuration? (Choose two.)
A. AS Path
B. Next Hop
C. Cluster List
D. Originator ID
Answer: CD

Juniper   JN0-130 questions   JN0-130 test questions   JN0-130 study guide   JN0-130

NO.12 Which CLI command disconnects all subscribers on an ATM PVC?
A. clear port 4/3.99
B. logout port 4/3.99
C. clear subscriber port 4/3.99
D. logout subscriber port 4/3.99
Answer: D

Juniper   JN0-130 demo   JN0-130 exam   JN0-130

NO.13 Which two types of routes may be advertised via EBGP? (Choose two.)
A. Routes that do not originate in the local AS and are learned by OSPF.
B. Routes that originate on the local router and are advertised into OSPF.
C. Routes that are transiting the local router and are BGP learned routes.
D. Routes that originate on the local router and are injected using a route map.
Answer: CD

Juniper Bootcamp   JN0-130 answers real questions   JN0-130   JN0-130

NO.14 You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs
each interface is using.
Which CLI command displays this information?
A. show fast interface
B. show vlan interface
C. show vlan subinterface
D. show fast interface vlan
Answer: C

Juniper   JN0-130   JN0-130 original questions   JN0-130 certification training   JN0-130 test

NO.15 Which two services protect the ERX Edge Router from unauthorized CLI logins?
A. IPSec
B. SecureID
C. local passwords
D. default IP policy
E. RADIUS authentication
Answer: CE

Juniper   JN0-130   JN0-130   JN0-130
16. Your ERX Edge Router is constantly going to a boot## prompt.
What is the most likely cause for this condition?
A. bad SRP
B. low voltage
C. bad mid-plane
D. corrupted flash
Answer: D

Juniper   JN0-130 certification   JN0-130   JN0-130   JN0-130 test questions   JN0-130 study guide
17. Which sequence of events describes the order used to restore normal router operation after
experiencing a corrupted flash?
A. initialize flash, reload, copy new system files from FTP server
B. reload, copy new system files from FTP server, initialize flash
C. initialize flash, copy new system files from FTP server, reload
D. reload, initialize flash, copy new system files from FTP server
Answer: C

Juniper   JN0-130   JN0-130   JN0-130
18. You are trying to recover from a corrupted flash.
Which configuration command configures an IP address of 192.168.1.1/24 on the SRP management
interface when the ERX1400 router is at the boot## prompt?
A. ip address 192.168.1.1/24
B. ip address 192.168.1.1 subnetmask 24
C. ip address 192.168.1.1 255.255.255.0
D. ip address 192.168.1.1 mask 255.255.255.0
Answer: C

Juniper   JN0-130 test   JN0-130 practice questions
19. What describes the functionality of NTP when using multiple virtual routers?
A. All virtual routers can act as NTP clients and servers.
B. Only one virtual router can act as an NTP client and a server.
C. Only one virtual router can act as an NTP server but all can be clients.
D. Only one virtual router can act as an NTP client but all can be servers.
Answer: D

Juniper exam   JN0-130 practice questions   JN0-130 exam prep
20. Which configuration command is used to make the ERX Edge Router an NTP server?
A. set ntp-server
B. set ntp server
C. ntp-server enable
D. ntp server enable
Answer: D

Braindumps Juniper   JN0-130 dumps   JN0-130 exam prep   JN0-130 study guide
21. Which configuration command allows a virtual router to receive updates from a configured NTP
source?
A. ntp enable
B. enable ntp
C. set ntp-client
D. enable ntp-client
Answer: A

Braindumps Juniper   JN0-130 answers real questions   JN0-130 study guide   JN0-130 test answers   JN0-130
22. Which configuration command is used to send debug level events to the console in real time?
A. log here severity debug
B. log destination console severity debug
C. log severity debug destination console
D. log realtime destination console severity debug
Answer: B

Juniper   JN0-130   JN0-130   JN0-130 exam   JN0-130
23. Which command initiates a packet trace for all PPP packets on interface atm 6/1.33 ?
A. log filter debug pppPacket atm 6/1.33
B. log severity debug pppPacket atm 6/1.33
C. log filter debug category pppPacket atm 6/1.33
D. log severity debug category pppPacket atm 6/1.33
Answer: B

Juniper exam   JN0-130   JN0-130   JN0-130 Bootcamp
24. Log messages are appearing very quickly on the console of your ERX Edge Router.
Which Privileged Exec command disables real-time console logging?
A. no log here
B. no log console
C. destination console severity 7
D. destination console logging off
Answer: A

Juniper   JN0-130   JN0-130   Braindumps JN0-130   JN0-130
25. Which two configuration commands are required to direct debug level console logging to your current
ERX Edge Router Telnet session? (Choose two.)
A. log here
B. log telnet here
C. log destination console severity 7
D. log destination telnet severity debug
Answer: AC

Juniper   Braindumps JN0-130   JN0-130   JN0-130
26. A log filter of log severity DEBUG pppPacket ATM 4/3.66 is configured within the category of
pppPacket.
Which configuration command removes this specific log filter?
A. no log severity pppPacket
B. no log severity debug pppPacket
C. no log severity pppPacket atm 4/3.66
D. no log severity debug pppPacket 4/3.66
Answer: C

Juniper   JN0-130   JN0-130
27. Which configuration command removes all log filters currently configured on the ERX Edge Router?
A. no log here
B. no log fields
C. no log filters
D. no log severity
Answer: C

Juniper   JN0-130   JN0-130 Bootcamp
28. Which three statements describe macros on the ERX Edge Router? (Choose three.)
A. They prompt users for input.
B. They cannot prompt users for input.
C. They can be created on the router itself.
D. They are an embedded programming language.
E. They can be created on the user's workstation.
Answer: ADE

Juniper practice test   JN0-130 exam prep   JN0-130   JN0-130   JN0-130 exam   JN0-130 original questions
29. Which command is used to execute a macro called setup.mac ?
A. macro setup
B. macro setup.mac
C. run macro setup
D. run macro setup.mac
Answer: B

Juniper   JN0-130   JN0-130 Bootcamp
30. Which control expression must be the last line in all macros?
A. <# end #>
B. <# finish #>
C. <# endtmpl #>
D. <# terminate #>
Answer: C

Juniper certification   JN0-130 braindump   JN0-130 dumps

DumpLeader offer the latest 000-474 exam material and high-quality BCP-340 pdf questions & answers. Our 70-246 VCE testing engine and C_TBIT44_73 study guide can help you pass the real exam. High-quality HP2-Z26 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.dumpleader.com/JN0-130_exam.html